P-660 Series Support Notes
4. Configure ATM setting in Menu 11.6-Remote Node ATM Layer Options. In Menu
11.1, setup "Edit ATM Options= Yes" to enter Menu 11.6 sub-Menu.
Menu 11.6 - Remote Node ATM Layer Options
VPI #= 0
VCI #= 33
ATM QoS Type= CBR
Peak Cell Rate (PCR)= 0
Sustain Cell Rate (SCR)= 0
Maximum Burst Size (MBS)= 0
Key Settings:
Option
Description
VPI & VCI
number
Specify a VPI (Virtual Path Identifier) and a VCI (Virtual Channel Identifier)
given to you by your ISP.
2. Internet Access Using P-660 under Router mode
For most Internet users having multiple computers want to share an Internet account
for Internet access, they have to install an Internet sharing device, like a router. In this
case, we use the P-660 which works as a general Router plus an ADSL
Modem. See the figure below for this setup.
Set up your workstation
1. Ethernet connection
18
All contents copyright © 2005 ZyXEL Communications Corporation.