P-660R-TxC Series Quick Start Guide
3
Note:
Configuration genie and Zero configuration are only able to configure the device automatically for
Internet access if you are using
PPPoE
,
PPPoA
or
ENET
ENCAP
encapsulation with a
dynamically-assigned IP address from your ISP.
If you’re not using these Internet access settings, then use the
Web Configurator Internet
Access Wizard
to manually configure the device.
You will need your Internet access information such as user name and password if given by your ISP.
2.1 Configuration Genie
From the included CD, click “Multimedia Auto Provisioner” (the installation and configuration assistant) and
then click “Installation Tutorial”. After you’ve viewed the tutorial, click “Configuration Genie” at the end of the
installation tutorial or from “Multimedia Auto Provisioner” in the CD.
2.2 Zero Configuration
Launch your web browser and navigate to any web site (for
example, www.zyxel.com). The P-660R-TxC automatically
detects and configures your Internet connection. This may
take about two minutes.
If you have a
PPPoE
or
PPPoA
connection, a screen displays
prompting you to enter your Internet account information. Enter
the username, password and/or service name exactly as
provided. Click
Log on to the Internet !
.
INFORMATION FROM ISP
YOU ARE USING
ENCAPSULATION METHOD MODE
IP ADDRESS
None RFC1483
Bridge
N/A
ENET ENCAP
Routing
Dynamic
An IP address only
RFC1483
Routing
Static
A user name and password
PPPoA or PPPoE
Routing
Dynamic
PPPoA
Bridge
N/A
A user name, password and an IP address
PPPoA or PPPoE
Routing
Static
An IP address, subnet mask and a gateway IP
address
ENET ENCAP
Routing
Static
