ZyXEL Communications P-660HWP-D1, User Manual

Page: 259 / 374

Chapter 19 System
P-660HWP-D1 User’s Guide
259
19.2 Time Setting
To change your P-660HWP-D1’s time and date, click Maintenance > System > Time
Setting . The screen appears as shown. Use this screen to configure the P-660HWP-D1’s time
based on your local time zone.
Figure 155 System Time Setting
Old Password Type the default admin password ( 1234 ) or the existing password you use to
access the system for configuring advanced features.
New Password Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays a (*) for each character you type. After you change
the password, use the new password to access the P-660HWP-D1.
Retype to
Confirm
Type the new password again for confirmation.
Apply Click Apply to save your changes to the P-660HWP-D1.
Cancel Click Cancel to begin configuring this screen afresh.
Table 107 System General Setup
LABEL DESCRIPTION