ZyXEL Communications P-660HWP-D1, User Manual

Page: 231 / 374

P-660HWP-D1 User’s Guide
231
C
H A P T E R
17
Remote Management
Configuration
This chapter provides information on configuring remote management.
17.1 Remote Management Overview
Remote management allows you to determine which services/protocols can access which P-
660HWP-D1 interface (if any) from which computers.
"
When you configure remote management to allow management from the WAN,
you still need to configure a firewall rule to allow access.
You may manage your P-660HWP-D1 from a remote location via:
• Internet (WAN only)
• ALL (LAN and WAN)
• LAN only,
• Neither (Disable).
"
When you choose WAN only or LAN & WAN, you still need to configure a
firewall rule to allow access.
To disable remote management of a service, select Disable in the corresponding Access
Status field.
You may only have one remote management session running at a time. The P-660HWP-D1
automatically disconnects a remote management session of lower priority when another
remote management session of higher priority starts. The priorities for the different types of
remote management sessions are as follows.
1 Telnet
2
HTTP