ZyXEL Communications P-660HW-D1 V2, User Manual

Page: 63 / 358

Chapter 3 Wizard Setup for Internet Access
P-660HW-Dx v2 User’s Guide
63
"
The wireless stations and ZyXEL Device must use the same SSID, channel ID
and WEP encryption key (if WEP is enabled), WPA-PSK (if WPA-PSK is enabled)
for wireless communication.
4 This screen varies depending on the security mode you selected in the previous screen.
Fill in the field (if available) and click
Next .
3.3.1 Manually assign a WPA-PSK key
Choose Manually assign a WPA-PSK key in the Wireless LAN setup screen to set up a Pre-
Shared Key .
Figure 34 Manually assign a WPA key
The following table describes the labels in this screen.
3.3.2 Manually assign a WEP key
Choose Manually assign a WEP key to setup WEP Encryption parameters.
Table 15 Manually assign a WPA key
LABEL DESCRIPTION
Pre-Shared
Key
Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure
wireless connection by configuring WPA in the wireless LAN screens. You need to
configure an authentication server to do this.
Back Click Back to display the previous screen.
Next Click Next to proceed to the next screen.
Exit Click Exit to close the wizard screen without saving.