manualshive.com logo in svg

ZyXEL Communications P-660HW-D1 V2, User Manual

Share
Download
ZyXEL Communications P-660HW-D1 V2 User Manual Download Page 155

P-660HW-Dx v2 User’s Guide

155

C

H A P T E R

 

 10 

Firewall Configuration

This chapter shows you how to enable and configure the ZyXEL Device firewall.

10.1  Access Methods

The web configurator is, by far, the most comprehensive firewall configuration tool your 
ZyXEL Device has to offer. For this reason, it is recommended that you configure your 
firewall using the web configurator.CLI (Command Line Interpreter) commands provide 
limited configuration options and are only recommended for advanced users.

10.2  Firewall Policies Overview 

Firewall rules are grouped based on the direction of travel of packets to which they apply: 

By default, the ZyXEL Device’s stateful packet inspection allows packets traveling in the 
following directions:

• LAN to LAN/ Router 

This allows computers on the LAN to manage the ZyXEL Device and communicate 
between networks or subnets connected to the LAN interface.

• LAN to WAN

By default, the ZyXEL Device’s stateful packet inspection drops packets traveling in the 
following directions:

• WAN  to  LAN
• WAN  to  WAN/  Router 

This prevents computers on the WAN from using the ZyXEL Device as a gateway to 
communicate with other computers on the WAN and/or managing the ZyXEL Device.
You may define additional rules and sets or modify existing ones but please exercise 
extreme caution in doing so.

• LAN to LAN/ Router

• WAN to LAN

• LAN to WAN

• WAN to WAN/ Router

Summary of Contents for P-660HW-D1 V2







































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands