ENGLISH
6
4.
Push the power switch to the on position.
Make sure to remove the plastic sheet on the top panel.
Look at the LEDs (lights) on the top panel of the P-660HN-Fx.
• The
POWER
light blinks during start-up and is green once the P-660HN-
Fx is ready.
• Each
ETHERNET
light turns on if the corresponding
ETHERNET
port is
properly connected. The lights blink when the P-660HN-Fx is sending or
receiving data through the corresponding
ETHERNET
port.
• The
WLAN/WPS
light turns on when the wireless LAN is ready. It blinks
when the P-660HN-Fx is sending/receiving data through the wireless
LAN.
• The
DSL
light stays on if a physical DSL connection exists and blinks
when the P-660HN-Fx is initializing the DSL line.
• The
INTERNET
light stays on when Internet access is available and
blinks when there is data transmitted.
Launch your web browser and navigate to any web site (for example,
www.zyxel.com). The P-660HN-Fx automatically detects and configures your
Internet connection. This may take about two minutes.
Summary of Contents for P-660HN-Fx series
Page 2: ...2 ...
