ZyXEL Communications P-660HN-F1A, User Manual

Page: 47 / 430

Chapter 4 Tutorials
P-660HN-F1A User’s Guide
47
2
Click the Advanced Setup button and select 802.11bgn in the 802.11 Mode
field. Click Apply.
Thomas can now use the WPS feature to establish a wireless connection between
his notebook and the P-660HN-F1A (see
Section 4.2.2 on page 47 ). He can also
use the notebook’s wireless client to search for the P-660HN-F1A (see Section
4.2.3 on page 52 ).
4.2.2 Using WPS
This section shows you how to set up a wireless network using WPS. It uses the P-
660HN-F1A as the AP and ZyXEL NWD210N as the wireless client which connects
to the notebook.
Note: The wireless client must be a WPS-aware device (for example, a WPS USB
adapter or PCMCIA card).
There are two WPS methods to set up the wireless client settings:
• Push Button Configuration (PBC) - simply press a button. This is the easier
of the two methods.
• PIN Configuration - configure a Personal Identification Number (PIN) on the
P-660HN-F1A. A wireless client must also use the same PIN in order to
download the wireless network settings from the P-660HN-F1A.
Push Button Configuration (PBC)
1
Make sure that your P-660HN-F1A is turned on and your notebook is within the
cover range of the wireless signal.
2
Make sure that you have installed the wireless client driver and utility in your
notebook.