ZyXEL Communications P-660HN-F1, User Manual

Page: 256 / 366

Chapter 27 Product Specifications
ADSL Series User’s Guide
256
Firmware Specifications
USB Green On The ZyXEL Device recognizes a USB connection but there
is no traffic.
Blinking The ZyXEL Device is sending/receiving data to/from the
USB device connected to it.
Off The ZyXEL Device does not detect a USB connection.
Table 87
Hardware Specifications
Power Specification 12V 1.0A DC
Built-in Switch Four auto-negotiating, auto MDI/MDI-X 10/100 Mbps RJ-45 Ethernet ports
RESET Button Restores factory defaults
WLAN/WPS Button 1 second: Turn on or off WLAN
5 seconds: Start WPS
Operation Temperature 0º C ~ 40º C
Storage Temperature -25º ~ 65º C
Operation Humidity 20% ~ 90% RH
Storage Humidity 20% ~ 90% RH
Table 86
LED Descriptions
LED NAME COLOR STATUS DESCRIPTION
Table 88
Firmware Specifications
Default IP Address 192.168.1.1
Default Subnet Mask 255.255.255.0 (24 bits)
Default User Name admin
Default Password 1234
DHCP Server IP Pool Starting Address: 192.168.1.33
Size: 32
Static DHCP Addresses 10
Static Routes 16
Device Management Use the web configurator to easily configure the rich range of features on
the ZyXEL Device.
Wireless Functionality
(wireless devices only)
Allow the IEEE 802.11n, IEEE 802.11b and/or IEEE 802.11g wireless
clients to connect to the ZyXEL Device wirelessly. Enable wireless security
(WEP, WPA(2), WPA(2)-PSK) and/or MAC filtering to protect your wireless
network.
Firmware Upgrade Download new firmware (when available) from the ZyXEL web site and use
the web configurator, an HTTP/FTP/SCP/SFTP tool to put it on the ZyXEL
Device.
Note: Only upload firmware for your specific model!
Configuration Backup &
Restoration Make a copy of the ZyXEL Device’s configuration. You can put it back on
the ZyXEL Device later if you decide to revert back to an earl
i er
configuration.