P-660H-Tx v2 Support Notes
Step 1: In this case, we need to map ILA to more than one IGA, therefore we
must choose the
Full Feature
option from the
NAT
field in currently active
remote node, and assign IGA3 to P-660H-Tx v2’s WAN IP Address.
Step 2: Go to Web Configurator, Advanced Setup,
Network -> NAT ->
Address Mapping
to begin configuring Address Mapping Set #1. We can see
there are 10 blank rule table that could be configured. See the following setup
for the four rules in our case.
Rule 1 Setup: Select
One-to-One
type to map the FTP Server 1 with ILA1
(192.168.1.10) to IGA1 (200.0.0.1).
Rule 2 Setup: Selecting
One-to-One
type to map the FTP Server 2 with ILA2
(192.168.1.11) to IGA2 (200.0.0.2).
50
All contents copyright © 2006 ZyXEL Communications Corporation.
