![background image](http://html1.mh-extra.com/html/zyxel-communications/p-660h-t1/p-660h-t1_support-notes_944045107.webp)
P-660 series Support Notes
andw dth
sage
classes who need
bandwidth than configure
if
you want to reser
dwidth for traffic that doe
or
you want to limit the bandwidth of each class at t
nfigured value. (Please note
that
meat the s
ondition, you should also
wing
on the class.)
B
i
U
more
d amount. Do not select this
ve ban
s not match a bandwidth class
he co
to
econd c
disable bandwidth borro
Go to
VANC
->BW MGMT->Class Setup
, select the interface on which you
ould ke to setu the Class
Click the radio button besides the
Root Class
, then press
b-Class'
AD
ED
w
li
p
tree.
'Add Su
Key Settings:
Class Name
Give this class a name, for example,
'App'
Bandwidth
Configure the speed you would like to allocate to this class
Budget
Priority
Enter a number between 0 and 7 to set the priority of this class. The higher the
number, the higher the priority. The default setting is 3.
Bandwidth
Borrowing
Check this box if you would like to let this class to borrow bandwidth from it's
parents when the required bandwidth is higher than the configured amount. Do
not check this if you want to limit the bandwidth of this class at the configured
value.(Please note that you should also disable
Maximize Bandwidth Usage
on the interface to meat the condition.)
Enable
Bandwidth
Filter
Check this to specify the traffic types via IP addresses/Port numbers.
106
All contents copyright © 2005 ZyXEL Communications Corporation.