manualshive.com logo in svg

ZyXEL Communications P-660H-T1 v3s, User Manual

Share
Download
ZyXEL Communications P-660H-T1 v3s User Manual Download Page 197

P-660H-T1v3s User’s Guide

197

C

H A P T E R

 

 2 1  

Troubleshooting

This chapter offers some suggestions to solve problems you might encounter. The 
potential problems are divided into the following categories. 

•

Power, Hardware Connections, and LEDs

•

P-660H-T1v3s Access and Login

•
•

Internet Access

21.1  Power, Hardware Connections, and LEDs

The P-660H-T1v3s does not turn on. None of the LEDs turn on.

1

Make sure the P-660H-T1v3s is turned on. 

2

Make sure you are using the power adaptor or cord included with the P-660H-
T1v3s.

3

Make sure the power adaptor or cord is connected to the P-660H-T1v3s and 
plugged in to an appropriate power source. Make sure the power source is turned 
on.

4

Turn the P-660H-T1v3s off and on.

5

If the problem continues, contact the vendor.

One of the LEDs does not behave as expected.

1

Make sure you understand the normal behavior of the LED. See 

Section 1.4 on 

page 23

.

Summary of Contents for P-660H-T1 v3s

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands