6
• The
POWER
light blinks during start-up and is green once the P-
2612HNU-Fx is ready.
• An
ETHERNET
light turns on if the corresponding
ETHERNET
port
is properly connected. An Ethernet port’s light blinks when the P-
2612HNU-Fx is sending or receiving data through it.
• The
WLAN
light stays green when the wireless LAN is ready. It
blinks when the P-2612HNU-Fx is sending/receiving data through
the wireless LAN.
• The
DSL
light stays on if a physical DSL connection exists and
blinks when transmitting data.
The
WAN
light stays on if this port is properly connected and blinks
when transmitting data.
The
INTERNET
light is green when Internet access is available.
• The
PHONE
lights stay on when your SIP account is registered and
they blink if the receiver is off the hook.
• The
USB
light turns on when there is a USB device (printer or
memory stick) connected to the P-2612HNU-Fx and blinks when
transmitting data.
If no lights are on, check your connections. Make sure that
you have the power adaptor connected to the P-2612HNU-
Fx and plugged in to an appropriate power source. Make
sure the power source is turned on. Turn the P-2612HNU-Fx
off, wait for a few seconds and turn it back on. If the LEDs
are still off, contact your local vendor.