manualshive.com logo in svg

ZyXEL Communications P-2601HN(L)-F1 Series, User Manual

Share
Download
ZyXEL Communications P-2601HN(L)-F1 Series User Manual Download Page 68

Chapter 5 Broadband

P-2601HN(L)-F1 Series User’s Guide

68

WAN IP Address

The WAN IP address is an IP address for the ZyXEL Device, which makes it 
accessible from an outside network. It is used by the ZyXEL Device to 
communicate with other devices in other networks. It can be static (fixed) or 
dynamically assigned by the ISP each time the ZyXEL Device tries to access the 
Internet.

If your ISP assigns you a static WAN IP address, they should also assign you the 
subnet mask and DNS server IP address(es) (and a gateway IP address if you use 
the Ethernet encapsulation method). 

Multicast

Traditionally, IP packets are transmitted in one of either two ways - Unicast (1 
sender - 1 recipient) or Broadcast (1 sender - everybody on the network). 
Multicast delivers IP packets to a group of hosts on the network - not everybody 
and not just one.

IGMP

IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to 
establish membership in a Multicast group - it is not used to carry user data. 
There are three versions of IGMP. IGMP version 2 and 3 are improvements over 
version 1, but IGMP version 1 is still in wide use.

Finding Out More

See 

Section 5.3 on page 76

 for technical background information on WAN.

5.1.2  Before You Begin

You need to know your Internet access settings such as encapsulation and WAN IP 
address. Get this information from your ISP.

Summary of Contents for P-2601HN(L)-F1 Series

























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands