manualshive.com logo in svg

ZyXEL Communications P-2601HN(L)-F1 Series, User Manual

Share
Download
ZyXEL Communications P-2601HN(L)-F1 Series User Manual Download Page 76

Chapter 5 Broadband

P-2601HN(L)-F1 Series User’s Guide

76

5.3  Technical Reference

This section provides some technical background information about the topics 
covered in this chapter.

5.3.1  Encapsulation

Be sure to use the encapsulation method required by your ISP. The ZyXEL Device 
supports the following methods.

5.3.1.1  PPP over Ethernet

The ZyXEL Device supports PPPoE (Point-to-Point Protocol over Ethernet). PPPoE is 
an IETF Draft standard (RFC 2516) specifying how a personal computer (PC) 
interacts with a broadband modem (DSL, cable, wireless, etc.) connection. The 
PPPoE option is for a dial-up connection using PPPoE.

For the service provider, PPPoE offers an access and authentication method that 
works with existing access control systems (for example RADIUS).

One of the benefits of PPPoE is the ability to let you access one of multiple network 
services, a function known as dynamic service selection. This enables the service 
provider to easily create and offer new IP services for individuals.

Operationally, PPPoE saves significant effort for both you and the ISP or carrier, as 
it requires no specific configuration of the broadband modem at the customer site.

By implementing PPPoE directly on the ZyXEL Device (rather than individual 
computers), the computers on the LAN do not need PPPoE software installed, 

Sustain Cell 
Rate

The Sustain Cell Rate (SCR) sets the average cell rate (long-term) that 
can be transmitted. Type the SCR, which must be less than the PCR. 
Note that system default is 0 cells/sec. 

This field is available only when you select Non Realtime VBR or 
Realtime VBR.

Maximum Burst 
Size

Maximum Burst Size (MBS) refers to the maximum number of cells that 
can be sent at the peak rate. Type the MBS, which is less than 65535.

This field is available only when you select Non Realtime VBR or 
Realtime VBR.

Apply

Click Apply to save your changes back to the ZyXEL Device.

Back

Click Back to exit this screen without saving.

Table 7   

Broadband: Add/Edit: Bridge Mode (continued)

LABEL

DESCRIPTION

Summary of Contents for P-2601HN(L)-F1 Series

























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands