ZyXEL Communications P-2302HWL-P1, Firmware Release Notes

Page: 29 / 36

ZyXEL Confidential
360AJB0C1.rtf 29/36
dtmf <index>
<rfc2833|pcm|sipinfo|rfc2833like> Setup DTMF key type.
pri_compression <index>
<0:G711mu|8:G711A|18:G729> Change the primary compression type
sec_compression <index>
<0:G711mu|8:G711A|18:G729> Change the secondary compression type
portrange <index> <start port> <end port>
(40000~65535)
RTP/RTCP port range setting
transport <index> <udp|tcp> Setup SIP transport type.
callerid <index> <disable|enable> Disable or enable the caller id feature for VoIP.
autoredialpstn <index> <disable|enable> Disable or enable the auto redial
phoneselect <index><phone
port|0:All><0:No|1:Yes> Setup incoming call mapping to phone port.
vlantag <index> <disable|enable> Enable/disable VLAN Tag in VoIP packet.
tpid_vlantag <index> <TPID value (4 Byte)> Setup VLAN Tag - TPID.
vid_vlantag <index> <VID value (3 Byte)> Setup VLAN Tag - VID.
priority_vlantag <index> <TCI value (0-7)> Setup VLAN Tag - TCI.
diffservrtp <index> <0-7> Setup DiffServRtp for QoS.
diffservsip <index> <0-7> Setup DiffServSip for QoS.
mwiactive <index> <0:off|1:on> Disable or enable the voice message
mwitimeout <index> <minute> Setup mwi expiration time
rfc3325 <index><1: privacy call using
RFC3325, 0: privacy call using
draft-01>
Disable or enable the rfc3325
prack <index> <0:off|1:on> Active/in-active prack message
fakesipactive <index> <0:off|1:on> Active/in-active FAKE WAN IP service.
fakesipservaddr <index> <ip address> Setup FAKE WAN IP service IP Address
fakesipservport <index> <port> Setup FAKE WAN IP service port
outboundactive <index> <0:off|1:on> Active/in-active Outbound proxy service.
outboundaddr <index> <ip address> Setup Outbound proxy service. IP Address
outboundport <index> <port> Setup Outbound proxy service. port
outboundkaactive <index> <0:off|1:on> Active/in-active Outbound proxy service keep alive
outboundkaintvl <index> <second> Setup Outbound proxy service keep alive Interval
stunactive <index> <0:off|1:on> Active/in-active STUN service.
stunservaddr <index> <ip address> Setup STUN server IP Address.
stunservport <index> <port> Setup STUN server port number.
ringbackactive <index> <0:off|1:on> Disable or enable early media
ringbacktone <index> <tone> Select early media tone
musiconholdactive <index> <0:off|1:on> Disable or enable music on hold
musiconholdtone <index> <tone> Select music on hold tone
callfwd <index> <1-2> Select call forward table
mixermode <index><0: Local / 1: Remote> Select 3-way conference
mixermode
transafterconf <index><0:off|1:on> ON/OFF transfer conference
rfc3263 <index> <0:off|1:on> Disable or enable the rfc3263
featuresenable <index> <0~1> ON/OFF feature bits
Save <index> Save the configured value
display <index> Display the configured value.
dumpCfg Display working buffer value.
Free Free working buffer.
t38Protocol <index><0:UDPTL|1:RTP> select T.38 data transport protocol
t38RateMgnt <index><0:localTCF|1:transferredTCF
> select T.38 data rate management method
t38HsPktRate <index><10~80>ms setup T.38 high speed packet rate