ZyXEL Communications ONU-2024 Series, User Manual

Page: 224 / 268

Chapter 30 Cluster Management
ONU User’s Guide
224
30.1.1 What You Can Do in these Screens
• The Clustering Management Status screen lets you to manage switches through one
switch ( Section 30.2 on page 224 ).
• The Clustering Management Configuration screen lets you set the ONU as a cluster
manager and then sets it management properties ( Section 30.3 on page 227 ).
30.2 Cluster Management Status
Click Management > Cluster Management in the navigation panel to display the following
screen.
"
A cluster can only have one manager.
Figure 127 Management > Cluster Management
The following table describes the labels in this screen.
Table 91 Management > Cluster Management
LABEL DESCRIPTION
Status This field displays the role of this ONU within the cluster.
Manager
Member
(you see this if you access this screen in the cluster member switch directly
and not via the cluster manager)
None (neither a manager nor a member of a cluster)
Manager This field displays the cluster manager switch’s hardware MAC address.
The Number of
Member This field displays the number of switches that make up this cluster. The following
fields describe the cluster member switches.
Index You can manage cluster member switches via the cluster manager switch. Each
number in the
Index column is a hyperlink leading to the cluster member switch’s web
configurator (see Figure 128 on page 225 ).
MacAddr This is the cluster member switch’s hardware MAC address.
Name This is the cluster member switch’s System Name .