ZyXEL Communications Corp.
Proprietary & Confidential Information
Specifications are subject to change without notice
iii
This device is intended only for OEM integrators under the following
conditions:
1) The antenna must be installed such that 20 cm is maintained between the
antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or
antenna,
As long as 2 conditions above are met, further transmitter test will not be required.
However, the OEM integrator is still responsible for testing their end-product for
any additional compliance requirements required with this module installed (for
example, digital device emissions, PC peripheral requirements, etc.).
IMPORTANT NOTE:
In the event that these conditions can not be met (for
example certain laptop configurations or co-location with another transmitter), then
the FCC authorization is no longer considered valid and the FCC ID can not be
used on the final product. In these circumstances, the OEM integrator will be
responsible for re-evaluating the end product (including the transmitter) and
obtaining a separate FCC authorization.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
Additional Information that Must be Provided to OEM Integrators:
The end user should NOT be provided any instructions on how to remove or install
the device.
End Product Labeling
This transmitter module is authorized only for use in devices where the antenna
may be installed such that 20 cm may be maintained between the antenna and
users (for example access points, routers, wireless ASDL modems, and similar
equipment). The final end product must be labeled in a visible area with the
following: "Contains TX FCC ID:
I88NWD672NU
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user
regarding how to install or remove this RF module in the user
’
s manual of the end
product which integrates this module.
The end user manual shall include all required regulatory information/warning as
show in this manual.
