ZyXEL Communications NetAtlas User Manual Download Page 158

Page: 158 / 340

Chapter 13 System Configuration

NetAtlas EPON Manager User’s Guide

158

See the OLT User’s Guide for a list of supported traps.

13.3.1 Configuring SNMP

To display the SNMP screen, right-click on an OLT in the Device List Panel, and
click Configuration > System Configuration > SNMP.

Figure 105

System Configuration > SNMP.

Set

Allows the manager to set values for object variables within an agent.

Trap

Used by the agent to inform the manager of some events.

Table 74

SNMP Commands (continued)

COMMAN
D

DESCRIPTION

Summary of Contents for NetAtlas





















































































































































































































































































































































Search results

Summary of Contents for NetAtlas

Reviews:

Related manuals for NetAtlas

Brands by name

Popular brands

ZyXEL Communications NetAtlas, User Manual

Search results

Summary of Contents for NetAtlas

Reviews:

Related manuals for NetAtlas

Brands by name

Popular brands