Chapter 9 Fault
NetAtlas Workgroup User’s Guide
102
9.2 Loopback Test
Follow the steps below to perform an internal loopback test.
1
Click
Fault
>
Loopback Test
.
Alarm Type
Select the type of logs from the drop-down list box. Choices are
All
,
Communication
,
QualityOfService
,
ProcessingError
,
Equipment
and
Environmental
.
Select
All
for system event logs generated by all alarm types.
Select
Communication
for transmission and signal logs.
Select
QualityOfService
for performance logs.
Select
Processing Error
for software and configuration problem logs.
Select
Equipment
for hardware-related logs.
Select
Environmental
for environmental logs.
See the appendix for a more detailed list of possible alarm causes.
Severity
Select the severity level of the logs you want to display from the drop-down list
box. The choices and associated colors are as follows:
•
Critical - Red
•
Major - Orange
•
Minor - Yellow
•
Information - Blue
Sorted by
Select
Log Time
to sort event logs by the time at which they were generated or
select
Device Name
to sort event logs by the device from which they were
generated.
Date / To
Specify the time range to display the event logs.
Apply
Click
Apply
to display event logs generated within the specified time period.
Index
This field displays the index number of the event log.
Clear
This field displays whether this log was cleared.
ClearTime
This field displays when this log was cleared.
ClearUser
This field displays the name of the user who cleared this log.
Ack
This field displays whether a log has been acknowledged so that EMS users will
know when a log has been dealt with by an administrator.
AckTime
This field displays the date and time this log was acknowledged.
AckUser
This field displays the name of the user who acknowledged this log.
Type
This field displays the type of the event log.
Severity
This field displays the severity of the event log.
Device Name
This field displays the name of the device on which the event log was generated.
Port
This field displays the port number on which the event log was generated.
Date Time
This field displays the date and time when the event log was generated.
Description
This field displays some information about the event log.
Acknowledge
Click
Acknowledge
to acknowledge any selected log messages.
Delete
Click
Delete
to remove the selected log.
Close
Click
Close
to close this screen.
Table 44
Fault: Event Log (continued)
LABEL
DESCRIPTION
Summary of Contents for NetAtlas Workgroup
