Chapter 11 Wireless LAN
NBG6716 User’s Guide
93
The following table describes the labels in this screen.
11.3.4 WPA/WPA2
Select
WPA
or
WPA2
from the
Security Mode
list.
Note: WPA or WPA2 is not available if you enable WPS before you configure WPA or WPA2
in the
Wireless LAN 2.4G/5G > General
screen.
Table 34
Network > Wireless LAN 2.4G/5G > General: WPA-PSK/WPA2-PSK
LABEL
DESCRIPTION
Security Mode
Select
WPA-PSK
or
WPA2-PSK
to enable data encryption.
WPA-PSK
Compatible
This field appears when you choose
WPA2-PSK
as the
Security Mode
.
Check this field to allow wireless devices using
WPA-PSK
security mode to connect to
your NBG6716.
Pre-Shared Key
WPA-PSK/WPA2-PSK
uses a simple common password for authentication.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
Group Key Update
Timer
The
Group Key Update Timer
is the rate at which the AP sends a new group key out to
all clients.
The default is
3600
seconds (60 minutes).
Apply
Click
Apply
to save your changes back to the NBG6716.
Cancel
Click
Cancel
to reload the previous configuration for this screen.
