Chapter 11 Wireless LAN
NBG6716 User’s Guide
89
See the rest of this chapter for information on the other labels in this screen.
11.3 Wireless Security
The screen varies depending on what you select in the
Security Mode
field.
11.3.1 No Security
Select
No Security
to allow wireless clients to communicate with the access points without any
data encryption.
Note: If you do not enable any wireless security on your NBG6716, your network is
accessible to any wireless networking device that is within range.
Figure 57
Network > Wireless LAN 2.4G/5G > General: No Security
Security Mode
Select
Static WEP
,
WPA-PSK
,
WPA
,
WPA2-PSK
or
WPA2
to add security on this
wireless network. The wireless clients which want to associate to this network must have
same wireless security settings as this device. After you select to use a security,
additional options appears in this screen. See
for detailed
information on different security modes. Or you can select
No Security
to allow any
client to associate this network without authentication.
Note: If the WPS function is enabled (default), only
No Security
and
WPA2-PSK
are
available in this field.
Apply
Click
Apply
to save your changes back to the NBG6716.
Cancel
Click
Cancel
to reload the previous configuration for this screen.
Table 31
Network > Wireless LAN 2.4G/5G > General (continued)
LABEL
DESCRIPTION
