ZyXEL Communications NAS540, User Manual

Page: 304 / 372

Chapter 26 Maintenance Screens
Cloud Storage User’s Guide
304
26.3.1 Editing the Power Control Schedule Screen
Click Maintenance > Power Management > Edit to open this screen. Use this screen to
configure power control schedules to have the NAS turn on, turn off, or reboot at specified times.
Always
Power Off
Select this option to keep the NAS from automatically restarting when the power is
restored after a power failure. This is a computer’s “traditional” behavior. Select this if you
have other servers such as a domain controller or DNS server that you want to start or
check after a power failure before the NAS turns on.
Power On/Off Schedule
Enable Power
Control Schedule Select this option to have the NAS turn itself off and on or reboot according to the
schedules you configured.
Click Edit to go to the screen where you can configure the power control schedules.
Refer to Section 26.3.1 on page 304 for this screen.
Note:
Enable Wake On
LAN Enable Wake On LAN to be able to turn on the NAS through its wired Ethernet connection.
You must have a computer or router on your LAN that supports sending Wake On LAN
“magic packets” to turn on the NAS.
To use Wake On LAN from a computer on your LAN, install a program such as Wake On LAN
EX or another Wake On LAN program that supports sending magic packets.
You can use Wake On LAN from a remote location if the router in front of the NAS supports
sending magic packets.
Use the NAS’s power button or the Web Configurator’s Maintenance > Shutdown menu
to turn off the NAS.
Apply Click this to save your changes.
Reset Click this to restore previously saved settings.
Table 114
Maintenance > Power (continued)
LABEL DESCRIPTION