ZyXEL Communications MSC1000G Series, User Manual

Page: 884 / 1168

Chapter 30 profile Commands
Management Switch Card User’s Guide
884
30.13.4 profile ipqos2 set Command
Syntax:
profile ipqos2 set < profile > vcshaping < level > < max-rate > < depth >
where
This command sets the VC (Virtual Circuits) shaping level, maximum rate, and depth of a IPQoS2
profile.
30.13.5 profile ipqos queue Command
Syntax:
profile ipqos2 queue < profile > < id > < weight >|< max-rate > < depth >
where
This command sets the parameters of a queue for a specified IPQoS2 profile.
30.13.6 profile ipqos2 show Command
Syntax:
profile ipqos show < profile >
Displays all configured IPQoS2 profiles or a specified profile.
30.14 profile profsvr Commands
Use these commands to configure the profile server feature settings.
profile
An IPQoS2 profile name.
level
The assoiciated PVC level.
max-rate
The maximum rate of the queue.
depth
The maximum number of packets.
profile
An IPQoS2 profile name.
id
0~the number of queues-1. The queue index beginning at 0. For example, if you
have configured 4 queues for a profile, then you can enter a
id
from 0 to 3.
weight
You can configure different IPQoS2 profiles with queues that have the same queue
priority level. IPQoS2 then uses Weighted Round Robin (WRR) scheduling to service
these queues on a rotating basis based on their queue 2weight. Use these fields to
set the priority weight (1~127) of each queue in an IPQoS profile. The higher a
queue’s weight, the more service it gets.
max-rate
The maximum rate of the queue.
depth
The maximum number of packets.