ZyXEL Communications MSC1000G Series, User Manual

Page: 793 / 1168

Chapter 29 port Commands
Management Switch Card User’s Guide
793
29.11.1 port gbond set Command
Syntax:
port gbond set < slot > < bond_name > < portlist >
where
This command sets up a gbond group on the specified group of ports on a slot. The following is an
example.
29.11.2 port gbond show Command
Syntax:
port gbond show < slot > [< bond_name >]
where
This command displays gbond settings on the specified group of ports on a slot. The following is an
example.
29.11.3 port gbond delete Command
Syntax:
port gbond delete < slot > < bond_name >
where
< slot > =
The line card ID.
< bond_name > =
A descriptive name for the gbond group of DSL lines.
< portlist > =
The ports on a line card that connect the DSL lines on which gbond is configured.
ras> port gbond set 2 group2 3,4
< slot > =
The line card ID.
< bond_name > =
A descriptive name for the gbond group of DSL lines.
ras> port gbond show 2
slot bond name
port list
---- ------------------------------------
2 Group1
1,2
2 group2
3,4
< slot > =
The line card ID.
< bond_name > =
A descriptive name for the gbond group of DSL lines.