ZyXEL Communications MSC1000G Series, User Manual

Page: 1115 / 1168

Management Switch Card User’s Guide
1115
C
H A P T E R
3 9
Product Specifications
This appendix gives details about the IES default settings and MSC hardware and features.
39.1 IES Default Settings
This table lists major default settings.
Table 393
Default Settings
Default In-band IP Address 192.168.1.1
Default In-band Subnet Mask 255.255.255.0 (24 bits)
Default Out-of-band IP Address 192.168.0.1
Default Out-of-band Subnet Mask 255.255.255.0 (24 bits)
Default User Name admin
Default Password 1234
Default Console Port Settings VT100 terminal emulation, 9600 bps, No parity, 8 data bits, 1 stop bit,
and no flow control
VLAN Default Settings
One VLAN is created (this is also the management VLAN).
VID 1
Registration Fixed for the Ethernet and ADSL ports
Tagging Untagged for all ports
STP Default Settings
Enable/Disable State Disabled
STP Version MSTP
Operational Mode: auto
ADSL Profile Default Settings
Name: DEFVAL
Latency Mode Interleave
Upstream ADSL Settings: Downstream ADSL Settings:
Maximum Rate 1000 Kbps 24000 Kbps
Minimum Rate 32 Kbps 64 Kbps
Interleave Delay 20 ms 20 ms
Maximum Signal to Noise Ratio 31 db 31 db
Minimum Signal to Noise Ratio 6 db 6 db
Target Signal to Noise Ratio 12 db 12 db
Rate Adaptation Mode Startup Startup
Up Shift Margin 15 db 15 db