ZyXEL Communications MAX218M2W, User Manual

Page: 170 / 306

Chapter 12 Maintenance
MAX208M2W Series User’s Guide
166
NTP
NTP stands for Network Time Protocol. It is employed by devices connected to the
Internet in order to obtain a precise time setting from an official time server.
These time servers are accurate to within 200 microseconds.
12.2 Password
Use this screen to set up admin and guest accounts for logging into and managing
the WiMAX Device. The “admin” user can access and configure all screens. The
“guest” user can only perform some basic settings such as viewing the system
status information, configuring LAN, NAT, DDNS, and Firewall settings and reset
the MAX208M2W Series to factory defaults and restart the MAX208M2W Series.
Click Maintenance > Password to open this screen as shown next.
Figure 81 Password Screen
This screen contains the following fields:
Table 62 Password
LABEL DESCRIPTION
Group Select the group for which you want to change the login password.
Old
Password
Enter the old password for the login group.
New
Password
Enter the new password for the login group.
Retype Retype the new password for the login group.