ZyXEL Communications LTE7460-M608, User Manual

Page: 17 / 124

LTE7460-M608 User’s Guide
17
C
HAPTER
3
Tutorials
3.1 Overview
This chapter shows you how to use the LTE7460-M608’s various features.
• Connecting to the Internet , see page 17
• Configuring DHCP , see page 17 .
• Configuring Static Route for Routing to Another Network , see page 19 .
• Access the LTE7460-M608 Using DDNS , see page 20 .
3.2 Connecting to the Internet
This section gives you an example on how to connect to the Internet.
1
Insert the SIM Card into your LTE7460-M608 SIM slot. Make sure this SIM has an active data plan with your
Internet Service Provider (ISP).
2
Connect your LTE7460-M608 to your computer, and log into the Web Configurator.
3
If your SIM has a PIN Code, enter this code in the Home > Internet screen.
4
Use the Home screen or WAN > Internet Status screen to check the Internet Status (IPv4) or Internet Status
(IPv6) . If it shows Connected this means your internet connection is up.
3.3 Configuring DHCP
You can enable the DHCP(Dynamic Host Configuration Protocol) in your LTE7460-M608 to assign IP
addresses and DNS servers to systems that support DHCP client capability. DHCPallows clients to obtain
TCP/IP configuration at start-up from a server.
The following figure shows how Client A uses DHCP to join the LTE7460-M608’s network. First Client A
searches for an available DHCP, and sends a DHCP Discover broadcast message asking for an IP
address to connect to. Then the DHCP selects an IP address from its pool of IP addresses for Client A. The
DHCP sends a
DHCP Offer including the IP address selected and a lease time, which is the period of time
Client A will be able to use this IP address, After Client A has received DHCP offers for an IP address, it
chooses one and sends out a
DHCP Request including the IP address it chose. Finally the DHCP confirms