LTE3301-M209 User’s Guide
101
C
HAPTER
13
Interface Group
13.1 Overview
By default, the four LAN interfaces on the Zyxel Device are in the same group and can communicate
with each other. Creating a new interface will create a new LAN bridge interface (subnet) (for example,
192.168.2.0/24) that acts as a dependent LAN network, and is a different subnet from default LAN
subnet (192.168.1.0/24).
13.2 What You Can Do
• Use the
Interface Group
screen to create a new interface group (
).
13.3 Interface Group Screen
You can manually add a LAN/WLAN interface to a new group.
Use the
DHCP
screen to configure the private IP addresses the DHCP server on the Zyxel Device assigns
to the clients in the default and/or user-defined groups. See
for more information.
Use the
Interface Group
screen to create a new interface group, which is a new LAN bridge interface
(subnet). Click
Network > Interface Group
to open the following screen.
Figure 69
Network > Interface Group
The following table describes the fields in this screen.
Table 46 Network > Interface Group
LABEL
DESCRIPTION
Add
Click this button to create a new interface group.
Name
This shows the descriptive name of the group.
LAN Interface
This shows the interface group.
