Chapter 8 WLAN
LTE2566-M634 User’s Guide
65
8.3.3 WPA-PSK / WPA2-PSK
Select
WPA-PSK
/
WPA2-PSK
from the
Security Mode
list.
Note: WPA or WPA2 is not available if you enable WPS before you configure WPA or WPA2 in
the
Wireless LAN > General
screen.
Figure 45
Configuration > Network > Wireless LAN > General: WPA-PSK / WPA2-PSK
The following table describes the labels in this screen.
Table 21 Configuration > Network > Wireless LAN > General: WPA -PSK / WPA2-PSK
LABEL
DESCRIPTION
Security Mode
Select
WPA-PSK / WPA2-PSK
to enable data encryption.
Encryption
Select the encryption type of data encryption.
Select
AES
if your wireless clients can all use
AES.
Select
TKIP / AES
to allow the wireless clients to use either
TKIP
or
AES
.
Preshared Key
WPA-PSK / WPA2-PSK
uses a simple common password for authentication.
Type a preshared key from 8 to 63 case-sensitive keyboard characters.
Group Key Update
Timer
The
Group Key Update Timer
is the rate at which the AP sends a new group key out to all
clients.
The default is
3600
seconds (60 minutes).
Apply
Click
Apply
to save your changes back to the LTE2566-M634.