ZyXEL Communications IPC-3605N Manual Download Page 27

Page: 27 / 91

Configuration

5.1

Video Settings

The Video Settings screen consists of all the basic settings options. To access the main
setup page, click on the setup button at the top right in the live view screen. You can
configure detailed settings of your IP camera here.

The following table describes the labels found on this screen.

Label Description
Turbo Picture

This mode provides best video quality, but frame rate
is limited to 15.

Motion Adaptive

This mode provides 30FPS at a lower resolution

Enable 2

Stream

This enables the second stream for viewing from
mobile devices.

Stream-1/Stream-2
Resolution

Resolution settings. Options are QQVGA, QVGA,
VGA, and 1080x720 (720p)

Codec

The codec used to encode video. MPEG-4 can be
viewed from external devices, while H.264 uses less
bandwidth.

Summary of Contents for IPC-3605N



























































































Search results

Summary of Contents for IPC-3605N

Reviews:

Related manuals for IPC-3605N

Brands by name

Popular brands

ZyXEL Communications IPC-3605N, Manual

Search results

Summary of Contents for IPC-3605N

Reviews:

Related manuals for IPC-3605N

Brands by name

Popular brands