Specifications
Specifications
Software Specifications
• Delivery of Ethernet in the first mile using
legacy LAN technologies
• Support expandable configuration with device
stacking
• SNMP v1, v2 manageable
• Web management
• FTP/TFTP for firmware upload
• Console port configuration (RS-232)
• Telnet configuration and monitoring
• Spanning tree algorithm (802.1D) for loop free
connection
• 802.1Q VLAN aware bridging
- IGMP snooping supports multicast traffic
- QoS support with 802.1p
- DHCP relay agent option 82
- Port isolation
- 256 static VLAN entries (full-range VLAN ID
1 ~ 4094)
- 4 K MAC address entries
• Packet prioritizing per 802.1p (QoS)
- Static configuration—default priority setting
- 4 priority queues per PVC (up to 4 PVCs)
• Multicast
- IPv4 multicast forwarding (through L2 MAC)
- Static multicast membership configuration
- IGMP v1, v2 snooping & IGMP proxy mode
support
- Shared
VLAN multicast
- 256 multicast groups and each group can
contain 13 members
- IGMP filtering profile
- IGMP count limiting
- MVLAN
- DSL port multicast bandwidth control
• Management support
- CLI-based management from console/
Ethernet port
- SNMP v1, v2 and telnet through Inband
Ethernet interface and NetAtlas Access,
PC-based EMS management support
- Web-based management through Inband
Ethernet interface
- Secured Host: configure remote host IP
addresses for management
- UNIX syslog
- F/W upgrade, configuration backup & restore
via FTP and Web
- Text-based configuration file support
- Port configuration
- Alarm/Status Surveillance
- Performance monitoring
- Security and Memory Backup
- Self diagnostics
- Remote reset
- EMS Management support (*)
• MIB
- SNMP MIB II (RFC1213)
- SNMP v1
- SNMP v2
- RFC1493 Bridge MIB
- RFC1643 Ethernet MIB
- RFC1757 Four group of RMON
- RFC2674
- RFC4319 (formerly RFC3276) SHDSL Line MIB
Hardware Specifications
• Line coding: 16/32TC-PAM
• Transmit power: up to 13.5 dBm
• SHDSL payload format: ATM
• Rate Adaptation Mode: fixed, line probing
• Annex A and annex B PSD mask
• SHDSL line profile
• SHDSL alarm profile
• Power backoff
• ATM-based multi-paired bonding
• Standard Compliance
- ETSI SDSL (ETSI TS 101 524 V 1.2.1)
- ITU G.shdsl (ITU-T G.991.2 (2001))
- ITU G.shdls.bis (ITU-T G.991.2 (2004))
- ITU-T G.998.1
Physical Specifications
• 19” 1U rack mountable
• Dimensions: 270 (W) x 350 (D) x 44.45 (H) mm
• Weight: 4.8 Kg
• One Telco 50 connectors for 8-port G.SHDSL.bis
• One mini RJ11 console port for local
management
• Two 100Base-TX for uplink/cascading
• Status LEDs- System Status, Ethernet Link Status,
Ethernet Active Status, G.SHDSL.bis ports status,
Alarm
Power Supply (AC/DC)
IES-708-22A
• AC Power: 100 ~ 240 VAC, 50 ~ 60 Hz
IES-708-22
• DC Power: -36 ~ -72 V DC (*)
Power Consumption
• 12.84 Watt (AC power)
Environmental Specifications
• Operating Temperature: 0
°
C ~ 50
°
C
• Storage Temperature: -20
°
C ~ 70
°
C
• Operating Humidity: 10% ~ 90%
(non-condensing)
• Storage Humidity: 10% ~ 95%
(non-condensing)
Certification
• RoHS
• Safety
- UL 60950-1
- CSA 60950-1
- EN60950-1
- IEC 60950-1
• EMC
- FCC Part 15B Class A
- EN55022 Class A
- EN55024 Class A
- ETSI 300 386
• Reliability
- ETSI 300 019
• Telecom
- ITU-T K20
(*) Firmware upgradeable for future enhancement
