IES 1248 Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
45
6. For port 2, set it as non-member of channel 2 “01:00:5e:02:02:02”
7. For port 3, no need to change anything because its status as member of these
channels by default. Don’t forget to click “Config Save” to save your configuration
into flash.
CLI Command related:
switch
Smcast
Use the static
multicast filter
show
Display
all
MAC
addresses joined to
ADSL ports
set
<adsl port> <multicast
MAC> <join|leave>
Use join|leave to
add/remove multicast
