Chapter 14 Bandwidth Control
GS2210 Series User’s Guide
143
Figure 106
Advanced Applicat ion > Bandw idt h Cont rol
The follow ing t able descr ibes t he r elat ed labels in t his scr een.
Table 56
Advanced Applicat ion > Bandwidt h Cont r ol
LABEL
DESCRIPTION
Act ive
Select t his check box t o enable bandw idt h cont r ol on t he Sw it ch.
Port
This field displays t he por t num ber.
*
Set t ings in t his r ow apply t o all por t s.
Use t his r ow only if you want t o m ake som e set t ings t he sam e for all por t s. Use t his r ow first
t o set t he com m on set t ings and t hen m ake adj ust m ent s on a por t - by- por t basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Act ive
Select t his check box t o act ivat e ingr ess rat e lim it s on t his por t .
I ngr ess Rat e
Specify t he m axim um bandw idt h allow ed in k ilobit s per second ( Kbps) for t he incom ing t raffic
flow on a por t .
Note: Ingress rate bandwidth control applies to layer 2 traffic only.
Act ive
Select t his check box t o act ivat e egr ess rat e lim it s on t his por t .
Egr ess Rat e
Specify t he m ax im um bandw idt h allow ed in kilobit s per second ( Kbps) for t he out - going t raffic
flow on a por t .
Apply
Click Apply t o save your changes t o t he Sw it ch’s r un- t im e m em or y. The Sw it ch loses t hese
changes if it is t ur ned off or loses pow er, so use t he Sa v e link on t he t op nav igat ion panel t o
save your changes t o t he non- volat ile m em or y w hen you ar e done configur ing.
Cancel
Click Ca n ce l t o r eset t he fields.
