ZyXEL Communications GS1910 User Manual Download Page 13

Page: 13 / 76

Chapter 2 Hardware Installation and Connection

GS1910/XGS1910 Series User’s Guide

Using a #2 Philips screwdriver, install the M3 flat head screws through the
mounting bracket holes into the Switch.

Repeat steps

and

to install the second mounting bracket on the other side of

the Switch.

You may now mount the Switch on a rack. Proceed to the next section.

2.2.3 Mounting the Switch on a Rack

Position a mounting bracket (that is already attached to the Switch) on one side of
the rack, lining up the two screw holes on the bracket with the screw holes on the
side of the rack.

Figure 7

Mounting the Switch on a Rack

Using a #2 Philips screwdriver, install the M5 flat head screws through the
mounting bracket holes into the rack.

Repeat steps

and

to attach the second mounting bracket on the other side of

the rack.

Summary of Contents for GS1910













































































Search results

Summary of Contents for GS1910

Reviews:

Related manuals for GS1910

Brands by name

Popular brands

ZyXEL Communications GS1910, User Manual

Search results

Summary of Contents for GS1910

Reviews:

Related manuals for GS1910

Brands by name

Popular brands