ZyXEL Communications G-470, User Manual

Page: 65 / 110

G-470 User’s Guide
Chapter 6 Wireless Screens 65
Figure 34 Wireless Security: WPA(2)
The following table describes the labels in this screen.
Table 13 Wireless Security: WPA(2)
LABEL DESCRIPTION
Encryption Method Select WPA , WPA2 or WPA & WPA2 to configure user authentication
and improved data encryption.
EAP Type Select EAP-TLS, EAP-TTLS, EAP-LEAP or EAP-PEAP from the drop-
down box. See the Wireless Security appendix for more information.
Data Encryption Select TKIP , AES or TKIP + AES to enable data encryption. For more
information, see the Wireless Security appendix.
Trusted Root CA File
(EAP-TLS, EAP-TTLS and
EAP-PEAP only)
This is the name of the certificate issued by the certificate authority
(CA).
Select File Click here to choose a certificate.
Select a certificate from the list box and click
Select to activate it. Click
Delete if you want to remove a certificate from the list.
Alternatively, click Browse to locate a certificate. Click Upload to add it
to the list.
The certificate file must have a .pem or .cer ending.
Note: You must first have a wired connection to a network
and obtain the certificate(s) from a certificate
authority (CA).
Login Name Enter a user name.
This is the user name that you or an administrator set up on a RADIUS
server.
Password
(EAP-TTLS, EAL-LEAP and
EAP-PEAP only)
Enter the password associated with the login name above.
User Certificate File This is your encrypted private key file.