ZyXEL Communications G-470, User Manual

Page: 64 / 110

G-470 User’s Guide
64 Chapter 6 Wireless Screens
6.5.3 Wireless Security: WPA(2)-PSK
Select WPA-PSK , WPA2-PSK or WPA-PSK & WPA2-PSK in the Encryption Method
drop down list-box to display the next screen.
Figure 33 Wireless Security: WPA(2)-PSK
The following table describes the labels in this screen.
6.5.4 Wireless Security: WPA(2)
WPA (Wi-Fi Protected Access) is a subset of the IEEE 802.11i standard. WPA2 (IEEE
802.11i) is a wireless security standard that defines stronger encryption, authentication and
key management than WPA. Key differences between WPA(2) and WEP are user
authentication and improved data encryption.
Table 12 Wireless Security: WPA-PSK
LABEL DESCRIPTION
Encryption Method Select WPA-PSK , WPA2-PSK or WPA-PSK & WPA2-PSK if you want to
configure a pre-shared key. Choose this option only if your AP supports it.
Data Encryption Select TKIP , AES or TKIP + AES to enable data encryption. For more
information, see the Wireless Security appendix.
Pre-Shared Key The encryption mechanisms used for WPA and WPA-PSK are the same. The
only difference between the two is that WPA-PSK uses a simple common
password, instead of user-specific credentials.
Type a pre-shared key from 8 to 63 ASCII characters (including spaces and
symbols). This field is case-sensitive.
Apply Click Apply to save your changes to the device.
Reset Click Reset to begin configuring this screen afresh.