ZyXEL G-302 v3 User’s Guide
42
Chapter 3 ZyXEL Utility Configuration
The following table describes the labels in this screen.
3
If you select
Infrastructure
network type in the first screen, select
WEP
,
WPA
,
WPA2
,
WPA-PSK
or
WPA2-PSK
from the drop-down list box to enable data encryption. If you
select
Ad-Hoc
network type in the first screen, you can only use
WEP
encryption
method.
Otherwise, select
DISABLE
to allow the G-302 v3 to communicate with the
access points or other peer wireless computers without any data encryption and skip to
step
6
.
Figure 22
Profile: Security Setting: Encryption Type
4
The screen varies depending on the encryption method you select in the previous screen.
The settings must be exactly the same on the APs or other peer wireless computers as
they are on the G-302 v3. Refer to
for detailed information on
wireless security configuration.
Table 12
Profile: Wireless Setting: Select a Channel
LABEL
DESCRIPTION
Wireless Setting
Ad-Hoc Channel
Select a channel number from the drop-down list box. To associate to an ad-hoc
network, you must use the same channel as the peer computer.
Back
Click
Back
to return to the
Add New Profile
screen.
Next
Click
Next
to confirm your selection and advance to the
Encryption Type
screen.
Exit
Click
Exit
to discard changes and return to the
Add New Profile
screen.
Summary of Contents for G-302
