ZyXEL Communications ES-2024A, User Manual

Page: 156 / 221

ES-2024A User’s Guide
Chapter 27 Introducing the Commands 155
27.9.3 General Configuration Mode
The following table lists the commands in Configuration (or Config) mode.
session
Displays current SSH session(s).
system-information
Displays general system information.
time
Displays current system time and date.
timesync
Displays time server information.
trunk
Displays link aggregation information.
vlan
Displays the status of all VLANs.
<vlan-id>
Displays the status of the specified VLAN.
vlan-stacking
Displays VLAN stacking settings.
vlan1q gvrp
Displays GVRP settings.
port-isolation
Displays port isolation settings.
ssh <1|2> <[user@]dest-
ip>
Connects to an SSH server with the
specified SSH version.
[command </>]
Connects to an SSH server with the
specified SSH version and addition
commands to be executed on the server.
traceroute <ip|host-name> [in-
band|out-of-
band|vlan <vlan-
id>][ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a
device.
help
Displays command help information.
write memory
Saves current configuration to the
configuration file the switch is currently
using.
<index>
Saves current configuration to the
specified configuration file on the switch.
Table 57 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION
Table 58 Command Summary: Configuration Mode
COMMAND DESCRIPTION
admin-password <pw-string>
<confirm-string>
Changes the administrator
password.
bandwidth-
control
Enables bandwidth control.
diffserv
Enables DiffServ.
dscp <0-63>
priority <0-7>
Sets the DSCP-to-IEEE 802.1q
mappings.