manualshive.com logo in svg

ZyXEL Communications Comet 3356, User Manual

Share
Download
ZyXEL Communications Comet 3356 User Manual Download Page 11

4  Installation

Telephone Jack

Connect a telephone to the PHONE jack on the back panel of the modem to manually
dial and answer calls when the modem is not exchanging data.

Microphone

To connect an external microphone, connect it to the modem’s MIC jack on the back of
the modem.

Speaker

To connect an external speaker, connect it to the modem’s SPK jack found on the back
of the modem. To connect two speakers, obtain a dual-plug adapter that allows the
modem speaker jack to drive both speakers. This adapter can be found at most
electronics stores.

Driver and Software Installation

This section contains step by step procedures for installing the Windows 95 and NT
drivers, and configuring Dial-up Networking for the Comet.

Windows 95 Driver Installation

1.  From the Windows 95 desk top click the Start button, then choose Settings, then

click Control Panel.

2.  Double click on the Modem icon.

3.  From the Modem Properties dialogue box click the Add button.

 

4. Select 

Don’t connect my modem; I will select it from a list. Then click Next.

Summary of Contents for Comet 3356













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands