manualshive.com logo in svg

ZyXEL Communications CellPipe 7130 RG, User Manual

Share
Download
ZyXEL Communications CellPipe 7130 RG User Manual Download Page 6

Safety Warnings

CellPipe 7130 RG User’s Guide

6

Safety Warnings

• Do NOT use this product near water, for example, in a wet basement or near a swimming 

pool.

• Do NOT expose your device to dampness, dust or corrosive liquids.
• Do NOT store things on the device.
• Do NOT install, use, or service this device during a thunderstorm. There is a remote risk 

of electric shock from lightning.

• Connect ONLY suitable accessories to the device.
• Do NOT open the device or unit. Opening or removing covers can expose you to 

dangerous high voltage points or other risks. ONLY qualified service personnel should 
service or disassemble this device. Please contact your vendor for further information.

• Make sure to connect the cables to the correct ports.
• Place connecting cables carefully so that no one will step on them or stumble over them.
• Always disconnect all cables from this device before servicing or disassembling.
• Use ONLY an appropriate power adaptor or cord for your device.
• Connect the power adaptor or cord to the right supply voltage (for example, 110V AC in 

North America or 230V AC in Europe).

• Do NOT allow anything to rest on the power adaptor or cord and do NOT place the 

product where anyone can walk on the power adaptor or cord.

• Do NOT use the device if the power adaptor or cord is damaged as it might cause 

electrocution.

• If the power adaptor or cord is damaged, remove it from the device and the power 

source.

• Do NOT attempt to repair the power adaptor or cord. Contact your local vendor to order a 

new one.

• Do not use the device outside, and make sure all the connections are indoors. There is a 

remote risk of electric shock from lightning. 

• Do NOT obstruct the device ventilation slots, as insufficient airflow may harm your 

device. 

• Use only No. 26 AWG (American Wire Gauge) or larger telecommunication line cord.
• Antenna Warning! This device meets ETSI and FCC certification requirements when using 

the included antenna(s). Only use the included antenna(s). 

• If you wall mount your device, make sure that no electrical lines, gas or water pipes will 

be damaged.

Your product is marked with this symbol, which is known as the WEEE mark. WEEE 
stands for Waste Electronics and Electrical Equipment. It means that used electrical 
and electronic products should not be mixed with general waste. Used electrical and 
electronic equipment should be treated separately. 

Summary of Contents for CellPipe 7130 RG





















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands