ZyXEL Communications AMG1302-T10A User Manual Download Page 183

Page: 183 / 332

Chapter 17 Remote Management

AMG1302-T10A User’s Guide

183

The following table describes the labels in this screen.

17.5 The SNMP Screen

Simple Network Management Protocol is a protocol used for exchanging management information

between network devices. Your Device supports SNMP agent functionality, which allows a manager

station to manage and monitor the Device through the network. The Device supports SNMP version

one (SNMPv1) and version two (SNMPv2c). The next figure illustrates an SNMP management

operation.

Figure 104

SNMP Management Model

An SNMP managed network consists of two main types of component: agents and a manager.

An agent is a management software module that resides in a managed device (the Device). An

agent translates the local management information from the managed device into a form

compatible with SNMP. The manager is the console through which network administrators perform

Table 71

Advanced > Remote MGMT > FTP

LABEL

DESCRIPTION

Server Port

You may change the server port number for a service, if needed. However, you must use

the same port number in order to use that service for remote management.

Server Access

Select the interface(s) through which a computer may access the Device using this

service.

Secured Client IP

Address

A secured client is a “trusted” computer that is allowed to communicate with the Device

using this service.

Select

All

to allow any computer to access the Device using this service.

Choose

Selected

to just allow the computer with the IP address that you specify to

access the Device using this service.

Apply

Click this to save your changes.

Reset

Click this to restore your previously saved settings.

Summary of Contents for AMG1302-T10A













































































































































































































































































































































Search results

Summary of Contents for AMG1302-T10A

Reviews:

Related manuals for AMG1302-T10A

Brands by name

Popular brands

ZyXEL Communications AMG1302-T10A, User Manual

Search results

Summary of Contents for AMG1302-T10A

Reviews:

Related manuals for AMG1302-T10A

Brands by name

Popular brands