ZyXEL Communications AMG1302-T10A User Manual Download Page 177

Page: 177 / 332

AMG1302-T10A User’s Guide

177

H A P T E R

1 6

Dynamic DNS Setup

16.1 Overview

Dynamic DNS allows you to update your current dynamic IP address with one or many dynamic

DNS services so that anyone can contact you (in NetMeeting, CU-SeeMe, etc.). You can also access

your FTP server or Web site on your own computer using a domain name (for instance

myhost.dhs.org, where myhost is a name of your choice) that will never change instead of using an

IP address that changes each time you reconnect. Your friends or relatives will always be able to

call you even if they don't know your IP address.

First of all, you need to have registered a dynamic DNS account with www.dyndns.org. This is for

people with a dynamic IP from their ISP or DHCP server that would still like to have a domain name.

The Dynamic DNS service provider will give you a password or key.

16.1.1 What You Can Do in the DDNS Screen

Use the

Dynamic DNS

screen (

Section 16.2 on page 178

) to enable DDNS and configure the DDNS

settings on the Device.

16.1.2 What You Need To Know About DDNS

DYNDNS Wildcard

Enabling the wildcard feature for your host causes *.yourhost.dyndns.org to be aliased to the same

IP address as yourhost.dyndns.org. This feature is useful if you want to be able to use, for example,

www.yourhost.dyndns.org and still reach your hostname.

If you have a private WAN IP address, then you cannot use Dynamic DNS.

Summary of Contents for AMG1302-T10A













































































































































































































































































































































Search results

Summary of Contents for AMG1302-T10A

Reviews:

Related manuals for AMG1302-T10A

Brands by name

Popular brands

ZyXEL Communications AMG1302-T10A, User Manual

Search results

Summary of Contents for AMG1302-T10A

Reviews:

Related manuals for AMG1302-T10A

Brands by name

Popular brands