manualshive.com logo in svg

ZyXEL Communications AG-320, User Manual

Share
Download
ZyXEL Communications AG-320 User Manual Download Page 4

ZyXEL AG-320 User’s Guide

4

Certifications

Certifications

Federal Communications Commission (FCC) Interference Statement

The device complies with Part 15 of FCC rules. Operation is subject to the following two 
conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause 

undesired operations.

This equipment has been tested and found to comply with the limits for a Class B digital 
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a commercial environment. This equipment 
generates, uses, and can radiate radio frequency energy, and if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications.

If this equipment does cause harmful interference to radio/television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:

1

Reorient or relocate the receiving antenna.

2

Increase the separation between the equipment and the receiver.

3

Connect the equipment into an outlet on a circuit different from that to which the receiver 
is connected.

4

Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

• The equipment complies with FCC RF radiation exposure limits set forth for an 

uncontrolled environment, under 47 CFR 2.1093 paragraph (d)(2). End users must follow 
the specific operating instructions for satisfying RF exposure compliance. 

• This transmitter must not be co-located or operating in conjunction with any other 

antenna or transmitter. 

• For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor 

environment. 

• To comply with FCC RF exposure compliance requirements, a separation distance of at 

least 20 cm must be maintained between the antenna of this device and all persons. 

Summary of Contents for AG-320



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands