ZyXEL Communications ADSL/ADSL2/ADSL2+ Router 660R-6xC Series, User Manual

Page: 88 / 282

Prestige 660R-6xC Series User’s Guide
87 Chapter 10 Remote Management Configuration
10.1.2 Remote Management and NAT
When NAT is enabled:
• Use the Prestige’s WAN IP address when configuring from the WAN.
• Use the Prestige’s LAN IP address when configuring from the LAN.
10.1.3 System Timeout
There is a default system management idle timeout of five minutes (three hundred seconds).
The Prestige automatically logs you out if the management session remains idle for longer
than this timeout period. The management session does not time out when a statistics screen is
polling.
10.2 Telnet
You can configure your Prestige for remote Telnet access as shown next.
Figure 31 Telnet Configuration on a TCP/IP Network
10.3 FTP
You can upload and download Prestige firmware and configuration files using FTP. To use
this feature, your computer must have an FTP client.
10.4 Web
You can use the Prestige’s embedded web configurator for configuration and file
management. See the online help
for details.
10.5 Configuring Remote Management
Click Remote Management to open the following screen.