ZyXEL Communications AAM1212, User Manual

Page: 229 / 288

AAM1212 User’s Guide
228 Chapter 28 Switch Commands
where
This command sets the AAM’s leave all period timer for GVRP in milliseconds.
Switches join VLANs by making a declaration. A declaration is made by issuing a Join
message using GARP. A Leave All message terminates all registrations. GARP timers set
declaration timeout values.
The following example sets the Leave All Timer to 11000 milliseconds.
Figure 134 GARP Timer Leaveall Command Example
28.8.5 VLAN Port Show Command
Syntax:
switch vlan portshow [portlist]
where
This command displays the port’s VLAN settings.
The following example shows the settings for ADSL port 1.
Figure 135 VLAN Port Show Command Example
<leaveall msec>
= This sets the duration of the Leave All Period timer for GVRP
in milliseconds. Each port has a single Leave All Period timer.
Leave All Timer must be larger than Leave Timer; the default is
10000 milliseconds.
ras> switch garptimer leaveall 11000
[portlist]
= You can specify a single port <1>, all ports <*> or a list of ports
<1,3,enet1>. You can also include a range of ports
<1,5,6~10,enet1,enet2>.
ras> switch vlan portshow 1
port pvid priority frametype gvrp
----- ---- -------- --------- ----
1 1 0 all