ZyXEL Communications AAM1212-51, User Manual

Page: 60 / 435

AAM1212-51/53 Series User’s Guide
60 Chapter 4 Introducing the Web Configurator
Click the index number 1 to edit the default administrator account settings.
Figure 20 User Account
Enter the new password in the Password and Retype Password to confirm fields, and click
Modify . Do not forget to click Config Save before you exit the web configurator. See Section
4.6 on page 60 .
4.6 Saving Your Configuration
Click Apply in a configuration screen when you are done modifying the settings in that screen
to save your changes back to the run-time memory. Settings in the run-time memory are lost
when the AAM1212’s power is turned off.
Click Config Save in the navigation panel to save your configuration to nonvolatile memory.
Nonvolatile memory refers to the AAM1212’s storage that remains even if the AAM1212’s
power is turned off.
Note: Use Config Save when you are done with a configuration session.
4.7 Logging Out of the Web Configurator
Click Logout in any screen to exit the web configurator. You have to log in with your
password again after you log out. This is recommended after you finish a management session
both for security reasons and so you do not lock out other device administrators.