ZYPRESSEN Z3 1000VA USB, User Manual

Page: 9 / 36

9
ZYPRESSEN UPS User Manual
PLACEMENT
STORAGE
Battery mode:
When the UPS is in battery backup mode (battery mode), the UPS sounds an audible alarm every
10 seconds.
Low battery:
When the UPS is in battery backup mode (battery mode) and the battery energy begins to run low,
the UPS will beep every second.
Overload:
When the UPS is overloaded, the UPS will beep every 0.5 second to warn an overload condition.
Fault:
When there a UPS fault occurs, the UPS will continuously beep.
Install the UPS in a protected area that is free of excessive dust and has adequate air flow. Place
the UPS away from other units at least 20 cm to avoid interference. For best performance, keep
the indoor temperature between 0°C and 40°C.
All connected equipment should be turned off, then disconnect from the UPS to avoid battery drain.
Unplug the UPS from the wall outlet. Then turn off the UPS for storage. Store the UPS unit covered
and upright in environments where the ambient temperature is -20 C to 50 C with its battery fully
charged.
ALARM
PLACEMENT AND STORAGE