Page 4
Get Started with the E-Wave
Make sure the electrodes are placed properly on the skin (see “Electrodes and
Skin Care” for details) and that the lead wires are properly connected.
Turn on the unit by pressing ON for more than 1 second. A green light
indicates that the unit functions properly.
Keep pressing
↑
on either channel until a comfortable level is reached, as
indicated by your physician or therapist.
To stop treatment, keep pressing
↓
on the channel used until display and light
goes out after 1 additional second (mA will go to zero first). Thereafter
remove the electrodes and place them on the plastic pad.
Stimulation will run continuously until the treatment timer is changed or
the unit is turned off.
During treatment the display will show Remaining Time left on upper line
and Stimulation Level on lower line.
Controls and features.
Turn unit ON and OFF:
Press ON for 1 second to turn the unit on. The
display will light up and the right LED will be constant green. Keep pressing
OFF to turn the unit off. It takes one additional second after reaching 0 mA to
turn it off. If no controls have been touched for 60 seconds with level at 0 mA
or 60 seconds after timeout, the E-Wave will automatically turn off.
Summary of Contents for E-wave
Page 1: ...Page 1 Muscle Stimulation...
