ZYLUX ZVS-280 Owner'S Manual Download Page 3

 

3. 

FEATURES 

 

* Starter Disable / Immobiliser

 –

 Once the Keyless Entry / Immobiliser 

system is activated, the vehicle will be immobilised. The starter motor circuit 
will be interrupted. . 

 

Panic / Car Finder

 -

 

When activated, the indicators (or parking lights) will 

flash continuously.  
To activate the 

Panic / Car Finder 

feature, press and hold Button 1 for two 

seconds. 
To deactivate this feature, press Button 2. 

 

LED

 - 

The dash mounted LED will flash at a rate of once per second once the 

Keyless Entry / Immobiliser is activated.

 

 

Valet / Service Mode

  -

 Valet / Service mode disables the Immobiliser 

system. 
To activate Valet / Service mode, turn the ignition ON, close all the vehicles 
doors and press and hold Button 2 for two seconds. The indicators (or parking 
lights) will flash once and the LED will turn solid Red to indicate the system is 
in Valet / Service Mode 

 

To deactivate Valet / Service mode, turn the ignition ON, close all the 
doors and press and hold Button 2 for two seconds. The indicators (or 
parking lights) will flash twice and the LED will turn OFF to indicate 
that Valet / Service mode has been deactivated. 

 

*Omni Lock

 -

 The vehicles doors can be locked and unlocked by using the 

remote transmitter whilst the ignition is on. (*Note: Vehicle must be equipped 
with central locking) 

 

Last Stage Arming Memory

 –

 If the Keyless Entry Immobiliser System is 

armed and the vehicle’s battery is disconnected, when the battery is re-
connected the Immobiliser system will remain armed. 

 

Remote Control Code Learning

  –

 The Keyless Entry Immobiliser 

System can hold up to four Remote Controls. At any time a lost or stolen 
remote transmitter can be deleted from memory by your authorised installer. 

 

* Locking Outputs

 - If your vehicle is equipped with central locking, the 

Immobiliser system can be connected so the doors will lock when the 
Immobiliser is armed and unlock when disarmed. 

 

* Remote Boot Release

  -

 Press and hold Button 2 for two seconds to 

activate this feature. 
(Vehicle must contain electronic boot release for this feature to work

 

 

* Optional Features - Additional parts and labour may be required. 

 
 
 

Reviews: